ZUMEN
Tall Boundary Fence by Daiki@週末DIY
Daiki@週末DIY's avatar
Daiki@週末DIY
2026-04-21

Tall Boundary Fence

View blueprint →

Actual cost

¥17,210

Build time

7 h 10 min

Home center

コーナン

Actual size

W2072 × D384 × H355 mm

Comments

今回は道路境界フェンス(高型)にトライ。支柱は単管パイプを 1m 埋めて、その上に木材で化粧。台風でも無事でした。完成までトータル 1 ヶ月、ゆるゆる進めて楽しかったです。

Steps

Measure
W 2072 mm
MeasureSTEP 1 / 7

敷地境界を採寸し、支柱位置を 900mm 間隔で割り出し。地面の不陸も確認してます。

Level the ground
FoundationSTEP 2 / 7
Photo from step 2

支柱埋設用に 250mm × 800mm の穴を掘削。砕石を底に入れて排水確保。

Build the frame
Check for square
AssembleSTEP 3 / 7

単管 + 木材化粧の支柱を立てて、生コンを流し込み固定。乾燥に 2 日かけました。

Cut
Use the in-store cut service
CutSTEP 4 / 7

目隠し板 (1x4 SPF) を 1800mm にカット。屋外用なので木口にも防腐塗料を含浸させます。

Drive screws
コーススレッド 51mm
ScrewSTEP 5 / 7

支柱に板を 20mm 間隔で固定。テンプレで間隔を揃えると仕上がりが綺麗です。

Waterproof
Two coats required
WaterproofSTEP 6 / 7

オスモのウッドステインを 2 度塗り。半透明仕上げで木目を活かしてます。

Inspect
No wobble ✓
InspectSTEP 7 / 7

全体の垂直と上端ラインを確認。微妙なズレは微調整で揃えて完成。

Ratings

4.1/ 5
(15 ratings)Rate in the app

Comments3

  • 根太ピッチが詰まってる感じで、長年もちそうな設計です

  • Karen's avatar
    Karen
    2026/04/26

    DIY でこのクオリティすごい

  • weekend_maker's avatar
    weekend_maker
    2026/04/26

    ハードウッドの色変化が楽しみな仕上がりです

Post comments from the app

Open in app

Post your build, too

App only

Post your build

Post photos, actual cost, the home center, and a comment from the app and it'll appear in the gallery.

Post in the app

Want to build this? Get the app

Generate a custom-sized blueprint and a per-store material list for free.

Download on the App Store (free)