ZUMEN
Engawa-Style Bench by Kenta@iemori
Kenta@iemori's avatar
Kenta@iemori
2026-01-04

Engawa-Style Bench

View blueprint →

Actual cost

¥8,312

Build time

5 h 21 min

Home center

ロイヤルホームセンター

Actual size

W1378 × D412 × H618 mm

Comments

市販品ではしっくりこなかったので縁側風ベンチを自分で組みました。賃貸でも置けるサイズで設計してます。脚はハの字に開く形で安定感アップ。子供が座っても揺れません。家族にも好評で作って良かった。

Steps

Measure
W 1378 mm
MeasureSTEP 1 / 7

現地でメジャーを当てて、家具との干渉が出ない最大寸法を確定。木取り図を 1 枚にまとめてからホームセンターへ。

Mark a line
Use a try square
MarkSTEP 2 / 7

墨壺は使わずシャーペン派。墨線が薄い方が削って消せて、最終仕上げで困らないので。

Cut
Use the in-store cut service
CutSTEP 3 / 7

ホームセンターのカットサービスを利用。1 カット 30 円で精度も出るので、長い直線は基本ここで頼んでます。

Sand
#120 → #240
SandSTEP 4 / 7

棒ヤスリで木口の繊維方向に沿って軽く面取り。塗装ノリが目に見えて変わります。

Drill a hole
下穴 φ3.5mm
DrillSTEP 5 / 7

ビス止め位置に 3mm の下穴を開けて木割れを防止。皿取りビットで皿ビスが面一になるよう座ぐりも一緒に。

Build the frame
Tighten joints firmly
AssembleSTEP 6 / 7

下から積み上げる順で仮組み → 直角確認 → 本締めの 3 ステップで進行。焦らないのがコツ。

Paint
Watco oil / varnish
PaintSTEP 7 / 7

ブライワックスのジャコビーンを布で擦り込み。1 時間置いてからウエスで磨くと自然な艶が出ます。

Ratings

4.3/ 5
(11 ratings)Rate in the app

Comments3

  • Naoko木工3年's avatar
    Naoko木工3年
    2026/04/26

    ハードウッド使用ですか?経年で更にいい風合いになりそう

  • MAKERS_jp_115's avatar
    MAKERS_jp_115
    2026/04/26

    座り心地よさそう!

  • 木のあんこ's avatar
    木のあんこ
    2026/04/26

    貫の処理が綺麗ですね、横揺れもなさそう

Post comments from the app

Open in app

Post your build, too

App only

Post your build

Post photos, actual cost, the home center, and a comment from the app and it'll appear in the gallery.

Post in the app

Want to build this? Get the app

Generate a custom-sized blueprint and a per-store material list for free.

Download on the App Store (free)