ZUMEN
Multi-Tier Wall Storage by mizuho_手作り部

Multi-Tier Wall Storage

View blueprint →

Actual cost

¥6,411

Build time

3 h 48 min

Home center

カインズ

Actual size

W1201 × D262 × H297 mm

Comments

週末を使って多段壁面収納を作りました。一人暮らしなので一人で組み立てられる構造に。石膏ボードアンカー (ニトムズ) で棚 1 段あたり 30kg まで耐荷重を確保。完成までトータル 1 ヶ月、ゆるゆる進めて楽しかったです。

Steps

Measure
W 1201 mm
MeasureSTEP 1 / 7

現地でメジャーを当てて、家具との干渉が出ない最大寸法を確定。木取り図を 1 枚にまとめてからホームセンターへ。

Mark a line
Use a try square
MarkSTEP 2 / 7
Photo from step 2

材料の表裏とも墨を入れて、切る側を分かりやすく印付け。捨てる側にバツ印を入れる癖をつけてます。

Cut
Use the in-store cut service
CutSTEP 3 / 7

ホームセンターのカットサービスを利用。1 カット 30 円で精度も出るので、長い直線は基本ここで頼んでます。

Sand
#120 → #240
SandSTEP 4 / 7

オービタルサンダーで #120 → #240 と段階的に研磨。最後は手で順目に流して仕上げ。

Drill a hole
下穴 φ3.5mm
DrillSTEP 5 / 7

ビス止め位置に 3mm の下穴を開けて木割れを防止。皿取りビットで皿ビスが面一になるよう座ぐりも一緒に。

Build the frame
Tighten joints firmly
AssembleSTEP 6 / 7

タイトボンド III と 65mm コーススレッドで本組み。圧着 30 分待つと接着強度が段違いです。

Paint
Watco oil / varnish
PaintSTEP 7 / 7

蜜蝋ワックスでシンプル仕上げ。室内で使うので食品衛生法適合の塗料を選びました。

Ratings

4.1/ 5
(15 ratings)Rate in the app

Comments1

Post comments from the app

Open in app

Post your build, too

App only

Post your build

Post photos, actual cost, the home center, and a comment from the app and it'll appear in the gallery.

Post in the app

Want to build this? Get the app

Generate a custom-sized blueprint and a per-store material list for free.

Download on the App Store (free)