ZUMEN
Manga Bookshelf by Yusei
Yusei's avatar
Yusei
2025-10-30

Manga Bookshelf

View blueprint →

Actual cost

¥8,125

Build time

1 h 52 min

Home center

カインズ

Actual size

W608 × D577 × H787 mm

Comments

週末を使って漫画本棚を作りました。一人暮らしなので一人で組み立てられる構造に。棚板は 1x10 を採用。文庫本 60 冊載せても撓みなしでした。この作品で DIY のモチベがまた上がりました。

Steps

Measure
W 608 mm
MeasureSTEP 1 / 5

間取り図に実寸を書き込んで、棚 1 段ずつの高さと幅を割り出し。最終チェックは現場合わせ。

Cut
Use the in-store cut service
CutSTEP 2 / 5

切る前に治具をクランプで固定して、ガイド付きで切断。フリーハンドより遥かに直線が出ます。

Drill a hole
下穴 φ3.5mm
DrillSTEP 3 / 5

ビス止め位置に 3mm の下穴を開けて木割れを防止。皿取りビットで皿ビスが面一になるよう座ぐりも一緒に。

Build the frame
Tighten joints firmly
AssembleSTEP 4 / 5

下から積み上げる順で仮組み → 直角確認 → 本締めの 3 ステップで進行。焦らないのがコツ。

Inspect
No wobble ✓
InspectSTEP 5 / 5

完成後にガタつきと水平を確認。気になる箇所はサンドペーパーで微調整して仕上げました。

Ratings

4.3/ 5
(10 ratings)Rate in the app

Comments3

  • Yuto_workshop's avatar
    Yuto_workshop
    2026/04/26

    塗装の艶感が一段と上品になっています

  • MAKERS_jp_35's avatar
    MAKERS_jp_35
    2026/04/26

    棚板のたわみ対策ばっちりですね。ダボの追加が効いてそう

  • wood.archive_48's avatar
    wood.archive_48
    2026/04/26

    棚の奥行と天井までの距離、ちょうどいい感じ

Post comments from the app

Open in app

Post your build, too

App only

Post your build

Post photos, actual cost, the home center, and a comment from the app and it'll appear in the gallery.

Post in the app

Want to build this? Get the app

Generate a custom-sized blueprint and a per-store material list for free.

Download on the App Store (free)